Fast and individual: BETON2GO Configure your system individually
The modular design of our concrete filling stations allows for custom-tailored configuration that meets your requirements and spatial conditions to the “T”. The heart of the system is the mixing module. A planetary mixer with a mixing capacity of 0.5 m³ or 1 m³ per batch is available. You determine the size of your cement silo. You can opt for a standard silo of 30 m³ or enlarge the volume to 33 m³. The standard silo is equipped with a cement dust filter and a level measurement.
The size and number of storage hoppers are also custom-tailored to match your requirements. You can choose between two or four chambers with 3 m³ each. Optional attachments expand the volume to 4 m³ each. Loading is possible with shovel widths of up to 3,200 mm, expandable to 3,500 mm. The discharge conveyor has a standard length of 8 m and ends with a discharge height of 2.90 m. Optionally, the conveyor belt can be extended to 11 m; then it achieves a discharge height of 4 m.
Dimensions of a MA 15-4P, top view
Dimensions of a MA 15-2P, top view
A-C: Possible placement of the cement silo
1-4: Storage chambers for different grain sizes
Step-by-step configuration according to your requirements and wishes:
Cement dust filter
Belt conveyor
Dosing units with attachments
Planetary mixer with wear tiles (Video)
VEGA level indicator
Extra large and numerous mixer openings
Storage chamber (with specified depth and width for loading)
The modular design allows for flexible configuration and quick installation and disassembly
Technical data of the equipment variants
| Variant | MA 15-2P | MA 15-4P | MA 30-2P | MA 30-4P |
|---|---|---|---|---|
| Batch size | 0,5 m³ | 1 m³ | ||
| Volume of the mixer | 0,75 m³ | 1,5 m³ | ||
| Required power input | 28 kW | 48 kW | ||
| Hourly output | up to 15 m³ | up to 30 m³ | ||
| Electrical fuse | 32 A | 63 A | ||
| Diameter of planetary mixer | 1900 mm | 2600 mm | ||
| Size of storage hopper | 2 x 3 m³ | 4 x 3 m³ | 2 x 3 m³ | 4 x 3 m³ |
| Required installation space | approx. 80 m² | approx. 100 m² | approx. 80 m² | approx. 100 m² |
| Filling height of storage hopper | 2,47 m | 2,57 m | ||
| Shovel width for filling | 3,2 m (optional 3,5 m) | |||
| Grade of wear parts | chrome hard casting / chromium carbide (HRC 54 - 58) | |||
| Cement silo | 29 m³ (optional 34 m³) | |||
| Number of mixer arms | 4 | 6 | ||
| Concrete recipes | up to 100 | |||
Certified safety concept: protect your employees and customers
The personal safety of your customers when operating the system and of your employees during cleaning and maintenance is our highest priority.
This is the reason our safety concept for our Beton2Go filling station has been certified by DEKRA.
This concept allows for the operation of the systems in areas that are not fenced in or separated. A certified safety concept is of particular importance when a system is operated by untrained personnel (e.g. your customers).
In the event that an employee or customer enters a restricted area while the filling station is in operation, several safety switches shut down the machine immediately. Once somebody leaves the restricted area again, production goes on without any delay or any accumulation of waste products.
Performance level (PL) e
The entire system is integrated in a safety concept certified by DEKRA.
Hinged gates allow for easy access for cleaning and maintenance.
The entire system is integrated in a safety concept certified by DEKRA.
Configure your own concrete filling station – according to your needs and local conditions.
The entire concrete filling station consists of five single elements: one mixing module, gravel storage chambers with control, a discharge conveyor, a cement silo, a cement dust filter with a chip card reader.
The site only requires a 380 V/28kW-electricity connection. Water can be supplied via a permanent connection or a supplied storage tank. The maintenance effort for the system is about 0.5 hours per working day.
